Aluminum Siding Painting Services

As time has shown, the coating on aluminum siding is not durable. It wears away, becomes chalky, and dulls. In extreme cases, the metal itself can become exposed and then oxidize. If your home has suffered this fate, aluminum siding painting near me experts from Aksestroy LLC in New Jersey have the solution. Adding a fresh coat of high-quality paint will add shine to your home for years to come.

How Professionals Prep and Paint Aluminum Siding 

Aluminum siding is not affected by water and does not rust. However, when aluminum comes into contact with air, it forms oxides. Over time, the siding's color fades and loses its shine. Then, the surface shows signs of wear and tear and looks very unsightly. For this reason, aluminum siding requires regular maintenance. Replacing old siding with new siding will be quite an expensive undertaking. Therefore, a suitable alternative is to cover it with a fresh coat of paint.

Conventional paint contains substances that react with aluminum oxide, leading to gas formation and bubbles under the paint coating. As a result, the paint cannot adhere well to the aluminum surface and is easily destroyed. Therefore, you should choose acrylic latex paint for siding. After you have finished choosing the type and color of paint, follow the steps below.

Inspect & Repair

After the surface has been cleaned of dust and dirt, check if there is any damage on the siding. Dents, holes, and corroded places are probably the usual defects in aluminum siding and must be repaired before repainting. For dents, these should be pulled out using a screw and pliers. Refill with filler, sand it to a smooth finish, and repaint. Holes may require you to cut the panel and install a replacement piece. It can be repaired by sanding the area, applying a metal primer, then painting the panel.

Scrape & Scrub

Next, your paint crew will prepare your aluminum siding for painting by cleaning it. First, they will wash away any debris with a strong garden hose or pressure washer. Then, they will check for chalking powdery substance that forms on aluminum paint and mold.

Sand

If the siding has already been painted, they'll scrape off loose paint and then sand the rest with a random-orbit sander equipped with a 100-grit abrasive disc to bare metal. They aren't going to have to do much serious sanding because they are painting over a baked-in color the manufacturers put on. They could just give the boards a light once over with the sander or a wire brush just to make them more absorbent to the paint. A final quick rinse with the hose and all the dust would be removed, allowing the siding to dry.

Masking

Before painting, contractors cover areas not to be painted or that are in danger of paint spray with masking tape, plastic sheeting, and/or paper. They lay protective sheets on the driveway, plants, cars, and anywhere paint may fly off and cause damage.

Prime

Although the manufacturers claim that a primer is not required to paint over factory finishes, some professionals still suggest the use of galvanized metal etching primer. Allow at least four hours for the primer to cure before beginning painting.

Paint

Aluminum siding should not be painted on a windy day. Moreover, you should not do the job in direct sunlight. This is because heat and wind reduce the durability of the applied paint. A cool and cloudy day is ideal for painting siding. Just ensure that the interval between applying the primer and paint is no more than 48 hours. Sand the primer coat with 150-grit sandpaper. Light sanding helps the paint to adhere better. Then, use an airless sprayer to apply the paint, which will help you get an even coating.

Clean Up

After the paint is dry, all masking materials will be removed, and drop cloths will be discarded. Your home will look new, and your siding will last many years.

Benefits of Painting Aluminum Siding

As it so happens, though, homeowners unhappy with an unsightly siding are not necessarily stuck replacing it. Following are some of the benefits of hiring aluminum and vinyl siding painters instead of just leaving it as is or replacing it altogether:

• Cost Effective. The painting of the siding enhances the beauty of your house without having to spend fortunes. It's far cheaper than replacing the siding altogether.
• Transform Your Home. Painting gives your house an all-new look. A house painter can make it look fresher by changing the shade, intensity, or even an altogether different color scheme.

Why Choose Professional Painters from Aksestroy LLC

If you need high-quality, aesthetic, and prompt siding painting, we recommend contacting our professional company, Aksestroy LLC. With a team of qualified and experienced specialists, modern equipment, and all the necessary related resources, we use advanced technologies for painting various types of surfaces. Aluminum siding painters near me perform painting work of any complexity with a comprehensive approach and a guarantee.

FAQ

What types of Exterior surfaces do you paint?

We paint aluminum, fiber cement, vinyl, and wood sidings.

How many coats of paint do you apply?

Spray-applied painting is measured according to paint thickness.

Why people choose us

With us your projects are protected and handled professionally.

➤ PRO

Experienced
Specialists

➤ INSURED

Liability
Insurance

➤ FLEXIBLE SCHEDULE

Match your time
slots

➤ RATE & TIME

Done on time and on budget